HYDRA 16A -- The Rugged, Very Large Volume Printer for Serious Applications
SPECIFICATIONS IN X, Y, Z :
- 16A-S (Standard): 250mm Z (10″)
- 400x300mm X/Y (16×12″) — 120°C or 200°C bed
- 600x400mm X/Y (24×16″) — 120°C or 200°C bed
- 400x300mm X/Y (16×12″) — 120°C or 200°C bed
- 16A-T: (Tall) 500mm Z (20″)
- 600x400mm X/Y (24×16″) — 120°C or 200°C bed
SPECIFICATIONS IN X, Y, Z :
- 6x6x1 micron positional resolution
- 60x60x10 micron positional accuracy
- 30x30x5 micron positional repeatibility
- Belt X/Y and Ballscrew Z positioning
- Closed-loop encoder feedback motion
- Proprietary motion control
- Recommend print speeds up to 3000mm/min
SPECIFICATIONS IN X, Y, Z :
- Very Large scale prints
- Multiple material prints
- Multiple operations
- Volume production
- Circuit board milling, drilling, lasing
- Options:
- 40w CO2 laser
- Three-phase spindle tool
- Second Yoke (five more tool positions)
System 30M – The Workhorse for Material Science
SPECIFICATIONS IN X, Y, Z :
- 200x200x200mm (8x8x8″)
- 5x5x1 micron positional resolution
- 50x50x10 micron positional accuracy
- 25x25x5 micron positional repeatibility
- Belt-Belt-Ballscrew positioning
- Proprietary motion control
- Recommended print speeds up to 2000 mm/min
IDEAL FOR :
- Standard prints
- Multiple material prints
- Exotic materials
- Experimentation
Engine SR – The Standard Resolution Platform for the Laboratory
SPECIFICATIONS IN X, Y, Z :
- 200x200x200mm (8x8x8″)
- 5x5x1 micron positional resolution
- 50x50x10 micron positional accuracy
- 25x25x5 micron positional repeatibility
- Belt-Belt-Ballscrew positioning
- Proprietary motion control
- Recommended print speeds up to 2000 mm/min
IDEAL FOR :
- Standard prints
- Multiple material prints
- Exotic materials
- Experimentation
Engine HR – The High Resolution Platform for Biologicals and Micro-Scaffolds
SPECIFICATIONS IN X, Y, Z :
- 100x100x100mm (8x8x8″)
- 1x1x1 micron positional resolution
- 10x10x10 micron positional accuracy
- 5x5x5 micron positional repeatibility
- Ballscrew-Ballscrew-Ballscrew positioning
- Proprietary motion control
- Recommended print speeds up to 1000 mm/min
IDEAL FOR :
- Small scale prints
- Biologels
- Crosslinking resins
- Microscaffolding
- Tissue engineering
Modular Heads
HOT FLOW HEADS
FOR 1.75MM FILAMENTS AT UP TO 450°C
STANDARD
MK1-250
EXTRUDER
Standard Hot Flow
For the most common 1.75mm filaments on the market with service temperatures up to 250°C.
ABS, Nylons, PLA, PETT, etc.
READ MORE
VERY HOT
MK1-450
EXTRUDER
Very Hot Flow
For Exotic 1.75mm filaments with service temperatures between 250-450°C. Polycarbonate, PEEK, Ultem, Carbon Fiber
READ MORE
FLEXIBLE
MK2-250
EXTRUDER
Flexible Hot Flow
For Flexible 1.75mm filaments with service temperatures up to 250°C.
BendLay, FilaFlex, NinjaFlex, etc.
READ MORE
COLD AND WARM FLOW HEADS
FOR CLAYS, PASTES, RESINS, ADHESIVES AND HIGH VISCOSITY EMULSIFIABLES
COLD
WARM
VERY WARM
EMO-25
EXTRUDER
Cold Flow
Compatible with Sugru (Rubber), Clay, Porcelain, Plasticine, Silicone RTV, PMC, stc.
READ MORE
VOL-25
EXTRUDER
Warm Flow
For emulsifiable materials with service temperatures up to 100°C, such as waxes and glues
READ MORE
KRA-15
EXTRUDER
Very Warm Flow
For emulsifiable materials with service temperatures up to 150°C.
READ MORE
Crosslinking options
All of our clay/emulsion/liquid/resin-type heads have UV Crosslinking On Deman (COD) options,
including a COD UV LED array around the nozzle, and the newer UV Light Pen in 365, 405, and 450nm.
COLD FLOW SYRINGE HEADS
FOR LIQUIDS, GELS, BIOLOGICALS, AND OTHER LOW VISCOSITY EMULSIFIABLES
STANDARD
SDS-5
EXTRUDER
Sterile, Disposable
For low viscosity, room temperature materials with 5cc syringes. Liquids, Gels, Biologicals, etc.
READ MORE
STANDARD
SDS-10
EXTRUDER
Sterile, Disposable
For low viscosity, room temperature materials with 10cc syringes. Liquids, Gels, Biologicals, etc.
READ MORE
SPECIALITY
DSD
EXTRUDER
Dual Dispensing
For two-part mixtures at a 1:1 flow rate. Two-part epoxies.
Details soon!
SDS-30
EXTRUDER
Sterile, Disposable
For low viscosity, room temperature materials with 30cc syringes. Liquids, Gels, Biologicals, etc.
READ MORE
SDS-60
EXTRUDER
Sterile, Disposable
For low viscosity, room temperature materials with 60cc syringes. Liquids, Gels, Biologicals, etc.
READ MORE
SMH-2
EXTRUDER
Static Mixing Head Assembly
For two-part mixtures at a variable, user-programmed flow rates, with static (fixed) blending baffles. These heads are in production and in use in the field today.
Specialty / other
QUIET STORM
COOLING FAN
Additional, Directed Cooling
Programmable cooling where you want it.
Position, Program, Peace of Mind
READ MORE
ST1
ROUTER
Engrave, Cut, Route
For simple operations only possible with a spindle tool. NOTE: you must supply your own fixturing. Paper, Wood, Metals (Drilling only), PCB (Routing), Acrylic
READ MORE
LA6-450
LASER
Engrave, Cut, Trace
Add a 6 watt laser at 450 nanometers.
Cardboard, Foam, Paper, Acrylic, Metals (Engraving Only), PCB (Traces only)
READ MORE
INSPECTOR
MICROSCOPE
Illuminated, 100x Magnification
For close inspection of output from any heads.
Position, Focus, Inspect
READ MORE
Materials
Click Image to View MSPS Sheet with Print Specifications for that Material.
HIPS
Ninjaflex
Tglase
PVA
BendLay
Laybrick
PET
ABS-PC Alloy
PETG
Conductive ABS
PLA
ABS
Flex EcoPLA
Nylon
Some materials we print with:
- ABS (Acrylonitrile Butadiene Styrene)
- BendLay
- Clay
- LayBrick
- LayWood
- Metal Clay
- Ninjaflex
- Nylon (Including Taulman 618, 645, 910)
- PET (PolyEthylene Terephthalate)
- PETG (PolyEthylene Terephthalate Glycol-modified)
- PLA (Poly(Lactic Acid))
- Plasticine
- PlastInk Rubber
- Play-Doh
- PC (PolyCarbonate)
- PP (PolyPropylene)
- Porcelain
- PVA (Poly(Vinyl Alcohol))
- RTV Silicone
- Sculpey
- T-Glase